• Mag. Field Measurement
  • Excellent Linearity
  • IC Controlled Circuit
  • Excellent Stability

Introduction  

DGM-102 operates on the principle of Hall Effect in Semiconductors. A semiconductor carrying current develops an electromotive force, when placed in a magnetic field, in a direction perpendicular to the direction of both electric current and magnetic field. The magnitude of this e.m.f. is proportional to the field intensity, if the current is kept constant. This e.m.f. is called the Hall Voltage. The small Hall Voltage is amplified through a high stability amplifier so that a millivoltmeter connected at the output of the amplifier can be calibrated directly in magnetic field unit (gauss).

Applications

  • Wide application in industry where accurate measurements of magnetic field is required.
  • Measurement of steady magnetic field e.g. in loud speakers, dynamos, moving coil instruments etc.
  • Useful in laboratory experiments involving electromagnets.
Specifications
Range 0-2KG & 0-20KG
Resolution 1G at 0-2KG range
Accuracy ±0.5%
Temperature Upto 50°C
Display 3½ digit, 7 segment LED DPM with auto polarity and over flow indication
Power 110V ±10%, 50Hz
Transducer Hall Probe – InAs
Special Feature Indicate the direction of the magnetic field
Weight 3Kg
Dimensions 280mm X 255mm X 120mm
 
 

Top
  

  
12262 Goleta Avenue, Suite 121, Saratoga CA 95070 Phone: +1 408-230-9381 Fax: +1 408-898-4863, Email: info@svslabs.com
  
© 2003 SVSLabs. All rights reserved.